Skorpio:

MATINSA in their quest for constant improvement and innovation in the design and technology of its products has developed a machine for dyeing in rope delicate fabrics at high temperature. The SKORPIO is ideal for dyeing 100% polyester fabrics, cotton fabrics with Lycra and mixtures Wool/Polyester, Acetate/Viscose, Wool/Silk/Viscose, etc.

• The machine structure has been optimized for dyeing fabrics that require a relaxed movement, thanks to the storage chamber inclined longitudinal preventing compaction tissue. The end of the transport tube is shaped curve appropriate section to "slow down" the tissue in the storage chamber.
• Equipped with nozzle system Overflow/Jet of individualized setting.
• Drive reeel of large diameter to avoid problems of abrasion and marks.
• Reduced distance between the drive reel and storage chamber.
• Operational safety without entanglements at speeds of up to 600 m/min thanks to fully automatic adjustment system which is equipped with every rope.
• Increased uniformity of the dyeing bath through the electro-pump special design, which is twice as fast compared to traditional machines.
• The machine works with low liquor ratio from 1: 3 to 1: 6 due to the new structure of the storage chamber and the rapid recovery bath of circulation pump.
• Heat exchanger high efficiency, with a high rate of heating and minimum heat loss to the environment, resulting in large energy savings.
• To achieve high performance has been equipped with intelligent rinsing system, which controls the rinsing water consumption and shortens the rinsing process.
• One or two tanks for addition products/dyes. Equipped with a stirrer, level sound, heating exchanger, control system with management level with pneumatic sound to reduce downtime in the phases of filling the bath, electro-pump to facilitate the functions of mixing/dissolution product and the introduction of products to machine at any temperature.
• Front loading and unloading of the fabric at ground level without platforms and equipped with observation window of rope circulation.
• Cabinet electric power/maneuvers of stainless steel, equipped with our programmer MATPC-1000 for automatic full control of the entire dyeing process. Thanks to the touch screen, specifically designed for industrial use, can be accessed easily and immediately to any function manner. If customer requires it, you can install any programmer on the market.
• Machines built from 50 kg to 800 kg, equipped with the best automation for dyeing can be performed efficiently and with total guarantee of reproducibility.